If Your Hot Water System Abruptly Stops Working: What to Do
If Your Hot Water System Abruptly Stops Working: What to Do
Blog Article
Just how do you actually feel when it comes to Hot Water Heater Repair?
Lots of modern-day homes use an electric water heater for their furnace, because of its benefit and ease of use. Nonetheless, just like any other electric appliances, problems may arise with its use, suddenly. It can be actually irritating to get up to a chilly shower rather than a hot one or having your bathroom with water that isn't hot enough or perhaps also hot. Whatever the case might be, water heater problems can be fairly stressful. Luckily, we've made a checklist of feasible services to your hot water heater problems. There are a number of variables that might cause a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the primary power supply for safety. Whatever the issue is, getting it repaired must not position too much of a problem if you follow these actions:
Check Your Power Supply:
As standard as this may appear, it is very essential. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water suddenly retires is to confirm that it isn't a power issue. Check if the fuse is blown out or the breaker tripped. If the breaker is the concern, simply transform it off and on once again. Change any busted or worn-out fuse. Check the device with power after these changes to see if it's now functioning.
Check the Burner in the Hot Water Heater:
If it's not a power problem, after that attempt having a look at your burner if it is still functioning. Test each of your heating elements to ensure the problem isn't with any of them. If any one of them is faulty, replace that component and afterwards check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might require to check the temperature settings on your upper thermostat. Make certain the breaker is switched off before doing anything. Open the accessibility panel and also press the red button for temperature reset over the thermostat. This ought to assist heat up the water. Transform the breaker back on and check if the issue has been solved.
Call A Specialist:
If after replacing all defective parts and also resetting your temperature level, the water heater still isn't functioning, you might require to call a specialist plumber for a specialist viewpoint. The trouble with your heater could be that the cold and hot faucets have been changed or it might be undersized for the amount of hot water needed in your house. Whatever the case might be, an expert plumber would certainly aid fix the trouble.
Verdict
Hot water heater troubles are not constantly significant. Most of them result from small concerns like a blown fuse or damaged heating element. Replacing the defective parts need to work. Nonetheless, if you are still not able to fix the issue, give a call to your closest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our section about What Would Cause My Electric Water Heater to Stop Working?. Thanks so much for taking time to read our blog post. Are you aware of somebody who is excited about the niche? Why not share it. Thank you so much for your time spent reading it.
Book Instantly Report this page